Hardwoods are, in general, more durable and dense than soft timbers. Although not all hardwoods are not harder than softwoods, the main differences between them depend on their botanical origins. And for household items made of hardwood, including home flooring, one of the concerns that can affect the overall quality of work is the material used to attach a piece of hardwood to another similar material, or with a material of a completely different. Using the best screw for hardwood is a great option for a DIY hardwood project.
Many homeowners prefer hard timber furniture, wood panelling or floors since the majority of these wooden items are fairly dense, which meansif they are maintained properly they last a long time. They are also more resistant to dents and scratch.
Hardwoods are also a better option for making really strong woodwork joints like mortise and tenon joint because of their dense quality.
Screws for Hardwoods
The type of wood that you use or choosefor a furniture or any other woodworks is not the only thing that matters in making sure that your wooden masterpiece will havea quality finish that will last long or will be easy to maintain. And one of the things that you will have to consider when working with dense wood is the right fastener, including the best screws for dense woods.
If you have ever been to the screws and other fasteners’ section of a hardware center or a home center, it will be a bit challenging to find the right screw to pick, especially if it is your first time to visit the store or to do a woodworking project.
You may only need a few pieces of screws, but with the number of choices you will see placed in their respective boxes, you may find looking for the right fastener quite intimidating and confusing at the same time.
Types of Screws
There are many different types of screws available in the market today, and some of the most common of them are as follows:
- Premium multi-purpose screw.
This includes brands such as Spax, GRK or Hillman. As the term implies, this type of screw can be used to fasten various materials, including hardwood.
- 2 Opt for flat-headed screws as they are best for countersinking.
Flat screws are designed with an angle under the head that makes them easy to fit in countersunk holes.
- 3. Star or square drives
.Though Star drives can handle more torque than Square Drives and are more resistant to ‘camming’.They do make drivers last longer. But on a higher torque capacity, Star heads are, generally, in better condition once the screw is set. This makes removal of the screw easier if ever needed.
Choosing the Right Screw
Any screw may look as good as another to anyone who has not even done anything that requires fastening materials using them. But to those who have been working with these fasteners for every project that they are working on, choosing the bes screw for a job can mean a lot when it comes to making sure that their project succeeds.
And as there are literally hundreds of choices available, you will need to make sure you know what you are looking for when looking for the right screw to use for your woodworking project.
Any well-known screw supplier will be able to advise on what is generally the most appropriate screws for your project. One important thing to remember is that not all screws are made to provide the same fastening result and that using the most appropriate screw can mean a secure installation, while attaching the wrong screw can cause anaccident to happen any time.
Different Types of Materials to Fasten with Screws
There are different types of materia that normally require a different type of fasteners, specifically, screws. Take the following for instance ;
These screws are designed to work best in all types of wood including hardwood, MDF and chipboard. Smaller screws, obviously, will have less chance of splitting wooden materials. And if you need to use larger screws or will have to work near the end of a piece of wood, then it is safer to drill a pilot hole before fastening with the screw you picked.
This type of screws are designed to address the issue of different expansion rates and are best used for securing timber or chipboard to steel supports.
These screw are made for convenience since you will only need a screwdriver to fasten the screw to another material. Thesescrews are designed to drill their own holes and form their own mating threads to ensure the best fit even with a single attempt.
Timber decking screws
This type of screws is specifically designed to manage outdoor conditions with their durable, protective coatings.
Frame anchor screws
These screws are designed for attaching window and door frames that are made from PVC-U, wood or aluminium to brickwork without using plugs or nylon anchors.
As a general rule when choosing the best screws for hardwoods, you need to make sure to go with screws that are of the appropriate size. Look for a screw with a length that will allow two-thirds of its length to be fixed into the material being fastened to.